Audiovox FPE4207HR Manuel d'utilisateur télécharger pdf (Page 41)

Troubleshooting

Before calling for repair service, check the following items for possible remedies to an

encountered symptom.

Symptoms

Check item

Check that the AC power cord is plugged into the mains socket.

Unplug the power cord, wait for 60 seconds. Then re-insert plug into the mains

socket and turn on the unit again.

No power

Check video connections at the rear of the unit to see if it is properly connected to

the unit.

Adjust the contrast and brightness settings.

Select a correct input.

Is a non-compatible signal being input?

No picture

Increase the VOLUME.

Check that the unit is not muted.

Good picture but no sound

Adjust the contrast, color and brightness settings.

Good sound but poor color

Sometimes, poor picture quality occurs when an activated S-VHS camera or

camcorder is connected while another activated peripheral is connected. In this case,

switch off one of the peripherals.

Check whether the room is too bright.

Poor picture

Check the A/V connections.

This may be caused by electrical interference (e.g. hairdryer, nearby neon lights,

etc.).

Turn off the equipment.

This remote control is an universal remote control. If the remote control does not

work correctly when operating the monitor, try pressing the TV button.

Check whether the batteries are working. Replace if necessary.

Clean the remote control sensor lens on the unit.

Do not use the remote control under strong or fluorescent lighting.

The batteries should be inserted with polarity (+, -) aligned.

Snowy picture and noise

Horizontal dotted line

Remote operation fails.

Check if you have selected the correct VGA mode in your PC.

No stable or not

synchronized VGA picture

If your problem is not solved, turn your unit off and then on again.

Never attempt to repair a defective TV yourself.

Note:

No output from one

of the speakers

Adjust Balance in the AUDIO (SOUND) menu.

+ Do not use in hot and cold rooms (locations)

• When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not

a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as

this may cause the cabinet to deform and the LCD panel to malfunction.

(Storage temperature: 0°C to +50°C Working temperature: 5°C to +40°C )

Control buttons do not work.

Method 2: unplug the power cord, wait for a few seconds. Then re-plug the power

cord and turn on the unit again.(But all the setting you have made will be cleared.)

Method 1: Press POWER button on the main unit and wait for 3 seconds, then the

main unit will be turned off. Continue to wait for some time and then turn on the unit

again. (Recommended because all the setting you have made will not be cleared.)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 54 55

Commentaires sur ces manuels

Pas de commentaire

Audiovox FPE4207HR Manuel d'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Télévisions Audiovox FPE4207HR