Audiovox APS-997C Manuel d'installation télécharger pdf (Page 15)

128-8775b

15 of 32

3 WireGround Switched Door Lock/Unlock Wiring Detail

3 Wire Positive Switched Door Locks:

In this application, the Red wire of the door lock harness provides a + 12 volt pulse during the disarming

sequence, or pulsed 12 volt unlock output. Connect the Red wire to the low current 12 volt signal wire from

the factory door unlock switch to the factory door unlock relay.

The Green wire of the door lock harness provides a + 12 volt pulse during the arming sequence, or pulsed

12 volt lock output. Connect the Green wire to the low current 12 volt signal wire from the factory door

lock switch to the factory door lock relay. See Below For Wiring Detail.

3 Wire Positive Switched Door Lock/Unlock Wiring Detail

Driver Priority Unlocking:

For driver Priority Unlocking the Red/Black wire will be connected to unlock all doors, and the red, or green

will be used to unlock the drivers door dependent upon the door unlock polarity. Please review the refer-

ence diagram below and wire according to the vehicle type you are working on.

Negative Switch Driver Priority

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Pas de commentaire

Audiovox APS-997C Manuel d'installation Page 15