Audiovox MMD10 - DVD Player With LCD Monitor Guide d'installation télécharger pdf (Page 22)

TURNING THE UNIT ON OR OFF

1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a

comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use.

2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting

will illuminate the controls.

3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to optimize the picture

quality.

4. Remember to turn the unit off and pivot the LCD to the locked position when not in use.

Power

ON/OFF

Button

Remote Sensor

Infrared Transmitter

Screen Release

OVERHEAD DOME LIGHTS

The Dome Lights integrated into the MMD11 are controlled by a three position slide switch. Sliding the switch to the ON position will turn

the lights ON. The OFF position will prevent the lights from turning ON with the vehicle’s interior lighting, and the auto position will allow the

lights to turn ON and OFF with the vehicle’s interior lighting. Refer to the Installation Guide for wire connections. Do not leave the vehicle

unattended with the dome light switch in the ON position, as this could result in a discharged battery.

REMOTE SENSOR

The MMD11 infrared remote sensors to relay signals to the unit when the remote control is pointed at the remote sensor.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Audiovox MMD10 - DVD Player With LCD Monitor Guide d'installation Page 22