Audiovox DBS-4800 Instructions d'exploitation Page 30

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 61
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 29
27
ENGLISH
Basic Operation Basic Operation
ENGLISH
2 Operating the surround mode and the surround
parameters from the main units panel
1
Turn the SELECT knob to select the surround
mode.
When turned clockwise:
2
Press and hold in the SURROUND PARAMETER
button to select the parameter you want to set.
The parameters which can be set differ for the different
surround modes are displayed. (Refer to Surround modes
and parameters ( page 51).)
When turned counterclockwise:
To select the surround mode while adjusting the surround
parameters, tone defeat or tone control, press the
SURROUND MODE button, then operate the selector.
2 Surround parameters r
ROOM SIZE:
This sets the size of the sound field.
There are five settings: small, med.s (medium-small),
medium, med.l (medium-large) and large. small
recreates a small sound field, large a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the level
if the sound seems distorted.
DELAY TIME:
The delay time can be set within the range of 0 to 110 ms only
in the matrix mode.
TONE CONTROL:
This can be set individually for each surround mode except
DIRECT.
3
Display the parameter you want to adjust, then
turn the SELECT knob to set it.
When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
SURROUND PARAMETER
TONE DEFEAT
TONE CONTROL
SURROUND MODE SELECT
CH SELECT /
ENTER
CURSOR F
CURSOR G
Vue de la page 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 60 61

Commentaires sur ces manuels

Pas de commentaire